HS270W
Wooden Headphone Stand
The combination of wood and metal
The head beam and base of the HS270W headphone stand are made of raw wood and are available in walnut and beech. The walnut version uses black aluminum alloy support rod, and the beech version uses silver aluminum alloy support rod.
270mm effective height to prevent the plug from being stressed
Different brands of headphones have different types of cables. If the plug of the headphone cable is located at the very bottom, then it needs enough height space to avoid stressing the plug and thus crushing the cable.
Detachable head beam and support rod
Before installation, you need to put in the nylon gasket, and then install the upper section of the metal support rod into the center screw position of the head beam.
Note：When installing, it is enough to tighten it slightly, but not too tight, so as to avoid the difficulty of disassembling it when necessary.
Large diameter base to not tip over easily
The base has a large diameter and is not easily tilted over under normal use. The base is designed in the shape of a tray, which can be used to store cables and plugs.
Install from top to bottom
Head beam
Nylon gasket
Upper support rod
Decorative ring
Lower support rod
Wooden tray base
Screw
Specifications
Head beam material: Walnut wood (black color) / Beech wood (light color)
Base material: Walnut wood (black color) / Beech wood (light color)
Support rod material: Anodized aluminum alloy
Height: 270mm
Diameter for the base: 150mm
Weight: About 220g~230g
If you are interested in getting one, please check with local sales agent for its availability. If there is no sales agent in your local market, just grab one from DD Aliexpress store.
